Caltech Logo
Catalog
Caltech Course Catalog / Archive / 2016-17 Catalog / Department / EE

2016-17 Catalog: Electrical Engineering

EE 1

Introduction to Electrical Engineering Seminar

1 unit   |  second term
Required for EE undergraduates. Weekly seminar given by faculty in the department broadly describing different areas of electrical engineering: circuits and VLSI, communications, control, devices, images and vision, information theory, learning and pattern recognition, MEMS and micromachining, networks, electromagnetics and opto-electronics, RF and microwave circuits and antennas, robotics and signal processing, and specifically, research going on at Caltech.
Instructor: Hajimiri
EE 5

Introduction to Embedded Systems

6 units (2-3-1)   |  third term
This course is intended to give the student a basic understanding of the major hardware and software principles involved in the specification and design of embedded systems. Topics include basic digital logic, CPU and embedded system architecture, and embedded systems programming principles (events, user interfaces, and multitasking). The class is intended for students who wish to gain a basic understanding of embedded systems or for those who would like an introduction to the material before taking EE/CS 51/52. Graded pass/fail.
Instructor: George
EE/ME 7

Introduction to Mechatronics

6 units (2-3-1)   |  second term
Mechatronics is the multi-disciplinary design of electro-mechanical systems. This course is intended to give the student a basic introduction to such systems. The course will focus on the implementations of sensor and actuator systems, the mechanical devices involved and the electrical circuits needed to interface with them. The class will consist of lectures and short labs where the student will be able to investigate the concepts discussed in lecture. Topics covered include motors, piezoelectric devices, light sensors, ultrasonic transducers, and navigational sensors such as accelerometers and gyroscopes. Graded pass/fail.
Instructor: George
APh/EE 9 ab

Solid-State Electronics for Integrated Circuits

6 units (2-2-2)   |  first, third terms
Prerequisites: Successful completion of APh/EE 9 a is a prerequisite for enrollment in APh/EE 9 b.
Introduction to solid-state electronics, including physical modeling and device fabrication. Topics: semiconductor crystal growth and device fabrication technology, carrier modeling, doping, generation and recombination, pn junction diodes, MOS capacitor and MOS transistor operation, and deviations from ideal behavior. Laboratory includes computer-aided layout, and fabrication and testing of light-emitting diodes, transistors, and inverters. Students learn photolithography, and use of vacuum systems, furnaces, and device-testing equipment.
Instructor: Scherer
EE 40

Introduction to Semiconductors Devices

9 units (3-0-6)   |  third term
Prerequisites: APh/EE 9 ab, Ma 2, Ph 2.
This course provides an introduction to semiconductors and semiconductor sensors. The fundamental physics of semiconductor electronics and devices will be emphasized, together with their applications. Overview of electronic properties of semiconductor that are significant to device operation for integrated circuits. Silicon device fabrication technology. Metal-semiconductor contacts, p-n junctions, bipolar transistors, photoconductors, diodes, transistors, CCDs, MOS/MOSFET/CMOS imagers, temperature sensors, magnetic sensors, thermoelectricity, piezoresistivity, piezoelectrics, etc.
Instructor: Choo
EE 44

Circuits and Systems

12 units (4-0-8)   |  first term
Prerequisites: Ph1 abc, should be taken concurrently with Ma 2 and Ph 2 a.
Fundamentals of circuits and network theory, circuit elements, linear circuits, terminals and port presentation, nodal and mesh analysis, time-domain analysis of circuits and systems, sinusoidal response, introductory frequency domain analysis, transfer functions, poles and zeros, time and transfer constants, network theorems, transformers.
Instructor: Hajimiri
EE 45

Electronics Laboratory

12 units (3-3-6)   |  second term
Prerequisites: EE 44.
Fundamentals of electronic circuits and systems. Lectures on diodes, transistors, small-signal analysis, frequency- domain analysis, application of Laplace transform, gain stages, differential signaling, operational amplifiers, introduction to radio and analog communication systems. Laboratory sessions on transient response, steady-state sinusoidal response and phasors, diodes, transistors, amplifiers.
Instructor: Emami
EE/CS 51

Principles of Microprocessor Systems

12 units (4-5-3)   |  first term
The principles and design of microprocessor-based computer systems. Lectures cover both hardware and software aspects of microprocessor system design such as interfacing to input and output devices, user interface design, real-time systems, and table-driven software. The homework emphasis is on software development, especially interfacing with hardware, in assembly language.
Instructor: George
EE/CS 52 ab

Microprocessor Systems Laboratory

9 units (3-6-0) second term   |  6 units (1-5-0) third term
Prerequisites: EE/CS 51 or equivalent. The student will design, build, and program a specified microprocessor-based system. This structured laboratory is organized to familiarize the student with electronic circuit construction techniques, modern development facilities, and standard design techniques. The lectures cover topics in microprocessor system design such as display technologies, interfacing with analog systems, and programming microprocessors in high-level languages.
Instructor: George
EE/CS 53

Microprocessor Project Laboratory

12 units (0-12-0)   |  first, second, third terms
Prerequisites: EE/CS 52 ab or equivalent.
A project laboratory to permit the student to select, design, and build a microprocessor-based system. The student is expected to take a project from proposal through design and implementation (possibly including PCB fabrication) to final review and documentation. May be repeated for credit.
Instructor: George
CS/EE/ME 75 abc

Introduction to Multidisciplinary Systems Engineering

3 units (2-0-1) , 6 units (2-0-4), or 9 units (2-0-7) first term   |  6 units (2-3-1), 9 units (2-6-1), or 12 units (2-9-1) second term
This course presents the fundamentals of modern multidisciplinary systems engineering in the context of a substantial design project. Students from a variety of disciplines will conceive, design, implement, and operate a system involving electrical, information, and mechanical engineering components. Specific tools will be provided for setting project goals and objectives, managing interfaces between component subsystems, working in design teams, and tracking progress against tasks. Students will be expected to apply knowledge from other courses at Caltech in designing and implementing specific subsystems. During the first two terms of the course, students will attend project meetings and learn some basic tools for project design, while taking courses in CS, EE, and ME that are related to the course project. During the third term, the entire team will build, document, and demonstrate the course design project, which will differ from year to year. Freshmen must receive permission from the lead instructor to enroll. Not offered 2016-17.
EE 80 abc

Senior Thesis

9 units   |  first, second, third terms
Prerequisites: instructor's permission, which should be obtained during the junior year to allow sufficient time for planning the research.
Individual research project, carried out under the supervision of a member of the electrical engineering or computer science faculty. Project must include significant design effort. Written report required. Open only to senior electrical engineering, computer science, or electrical and computer engineering majors. Not offered on a pass/fail basis.
Instructor: Staff
EE 90

Analog Electronics Project Laboratory

9 units (1-8-0)   |  third term
Prerequisites: EE 40 and EE 45.
A structured laboratory course that gives the student the opportunity to design and build a simple analog electronics project. The goal is to gain familiarity with circuit design and construction, component selection, CAD support, and debugging techniques.
Instructor: Megdal
EE 91 ab

Experimental Projects in Electronic Circuits

Units by arrangement; first, second terms   |  12 units minimum each term
Prerequisites: EE 45. Recommended: EE/CS 51 and 52, and EE 114 ab (may be taken concurrently). Open to seniors; others only with instructor's permission.
An opportunity to do advanced original projects in analog or digital electronics and electronic circuits. Selection of significant projects, the engineering approach, modern electronic techniques, demonstration and review of a finished product. DSP/microprocessor development support and analog/digital CAD facilities available. Text: literature references.
Instructor: Megdal
EE 99

Advanced Work in Electrical Engineering

Units to be arranged
Special problems relating to electrical engineering will be arranged. For undergraduates; students should consult with their advisers. Graded pass/fail.
EE 105 abc

Electrical Engineering Seminar

1 unit   |  first, second, third terms
All candidates for the M.S. degree in electrical engineering are required to attend any graduate seminar in any division each week of each term. Graded pass/fail.
Instructor: Hajimiri
EST/EE/ME 109

Energy Technology and Policy

9 units (3-0-6)   |  first term
Prerequisites: Ph 1 abc, Ch 1 ab and Ma 1 abc.
A discussion of how energy technology interacts with government policy. Renewable sources and the electricity grid. The shale gas revolution and fracking impacts. Electric vehicles and car mileage standards. Coal mining by mountaintop removal and pollution. Peak oil and the debate on limits to growth. Resource models and climate-change policy. Not offered 2016-17
EE 111

Signal-Processing Systems and Transforms

9 units (3-0-6)   |  first term
Prerequisites: Ma 1.
An introduction to continuous and discrete time signals and systems with emphasis on digital signal processing systems. Study of the Fourier transform, Fourier series, z-transforms, and the fast Fourier transform as applied in electrical engineering. Sampling theorems for continuous to discrete-time conversion. Difference equations for digital signal processing systems, digital system realizations with block diagrams, analysis of transient and steady state responses, and connections to other areas in science and engineering.
Instructor: Vaidyanathan
EE 112

Introduction to Digital Signal Processing

9 units (3-0-6)   |  second term
Prerequisites: EE 111 or equivalent. Math 3 recommended.
Fundamentals of digital signal processing, digital filtering, recursive and non recursive filters, linear phase and minimum phase systems, digital filter structures, allpass filters and applications, quantization and stability analysis, round-off noise calculations, Nyquist and sub-Nyquist sampling, elements of multrirate signal processing, reconstruction of sparsely sampled signals, statistical signal processing and sensor array signal processing, and applications in various areas. Offered 2016-17.
Instructor: Vaidyanathan
EE 113

Feedback and Control Circuits

9 units (3-3-3)   |  third term
Prerequisites: EE 45 or equivalent.
This class studies the design and implementation of feedback and control circuits. The course begins with an introduction to basic feedback circuits, using both op amps and transistors. These circuits are used to study feedback principles, including circuit topologies, stability, and compensation. Following this, basic control techniques and circuits are studied, including PID (Proportional-Integrated-Derivative) control, digital control, and fuzzy control. There is a significant laboratory component to this course, in which the student will be expected to design, build, analyze, test, and measure the circuits and systems discussed in the lectures.
Instructor: George
EE/MedE 114 ab

Analog Circuit Design

12 units (4-0-8)   |  second, third terms
Prerequisites: EE 44 or equivalent.
Analysis and design of analog circuits at the transistor level. Emphasis on design-oriented analysis, quantitative performance measures, and practical circuit limitations. Circuit performance evaluated by hand calculations and computer simulations. Recommended for juniors, seniors, and graduate students. Topics include: review of physics of bipolar and MOS transistors, low-frequency behavior of single-stage and multistage amplifiers, current sources, active loads, differential amplifiers, operational amplifiers, high-frequency circuit analysis using time- and transfer constants, high-frequency response of amplifiers, feedback in electronic circuits, stability of feedback amplifiers, and noise in electronic circuits, and supply and temperature independent biasing. A number of the following topics will be covered each year: trans-linear circuits, switched capacitor circuits, data conversion circuits (A/D and D/A), continuous-time Gm.C filters, phase locked loops, oscillators, and modulators. Not offered 2016-17.
Instructor: Staff
EE/MedE 115

Micro-/Nano-scales Electro-Optics

9 units (3-0-6)   |  first term
Prerequisites: Introductory electromagnetic class and consent of the instructor.
The course will cover various electro-optical phenomena and devices in the micro-/nano-scales. We will discuss basic properties of light, imaging, aberrations, eyes, detectors, lasers, micro-optical components and systems, scalar diffraction theory, interference/interferometers, holography, dielectric/plasmonic waveguides, and various Raman techniques. Topics may vary. Not offered 2016-17.
CMS/ACM/EE 117

Introduction to Probability and Random Processes

12 units (3-0-9)   |  first term
Prerequisites: ACM 104 and ACM/EE 116.
The course will start with a quick reminder on probability spaces, discrete and continuous random variables. It will cover the following core topics: branching processes, Poisson processes, limit theorems, Gaussian variables, vectors, spaces, processes and measures, the Brownian motion, Gaussian learning, game theory and decision theory (finite state space), martingales (concentration, convergence, Doob's inequalities, optional/optimal stopping, Snell's envelope), large deviations (introduction, if time permits).
Instructor: Owhadi
Ph/APh/EE/BE 118 abc

Physics of Measurement

9 units (3-0-6)   |  first and second terms
Prerequisites: Ph127, APh 105, or equivalent, or permission from instructor.
This course focuses on exploring the fundamental underpinnings of experimental measurements from the perspectives of responsivity, noise, backaction, and information. Its overarching goal is to enable students to critically evaluate real measurement systems, and to determine the ultimate fundamental and practical limits to information that can be extracted from them. Topics will include physical signal transduction and responsivity, fundamental noise processes, modulation, frequency conversion, synchronous detection, signal-sampling techniques, digitization, signal transforms, spectral analyses, and correlations. The first term will cover the essential fundamental underpinnings, while topics in second term will include examples from optical methods, high-frequency and fast temporal measurements, biological interfaces, signal transduction, biosensing, and measurements at the quantum limit.
Instructor: Roukes
EE 119 abc

Advanced Digital Systems Design

9 units (3-3-3) first, second term; 9 units (1-8-0) third term   |  first, second, third terms
Prerequisites: EE/CS 52 ab or CS/EE 181 a or CS 24.

Advanced digital design as it applies to the design of systems using PLDs and ASICs (in particular, gate arrays and standard cells). The course covers both design and implementation details of various systems and logic device technologies. The emphasis is on the practical aspects of ASIC design, such as timing, testing, and fault grading. Topics include synchronous design, state machine design, ALU and CPU design, application-specific parallel computer design, design for testability, PALs, FPGAs, VHDL, standard cells, timing analysis, fault vectors, and fault grading. Students are expected to design and implement both systems discussed in the class as well as self-proposed systems using a variety of technologies and tools. Offered 2016-17.

Instructor: George
EE 120

Topics in Information Theory

9 units (3-0-6)   |  third term
This class introduces information measures such as entropy, information divergence, mutual information, information density from a probabilistic point of view, and discusses the relations of those quantities to problems in data compression and transmission, statistical inference, language modeling, game theory and control. Topics include information projection, data processing inequalities, sufficient statistics, hypothesis testing, single-shot approach in information theory, large deviations. Prerequisites: undergraduate calculus and probability; desirable but not required: EE126a. Not offered 2016-17
Instructor: Kostina
EE/MedE 124

Mixed-mode Integrated Circuits

9 units (3-0-6)   |  first term
Prerequisites: EE 45 a or equivalent.
Introduction to selected topics in mixed-signal circuits and systems in highly scaled CMOS technologies. Design challenges and limitations in current and future technologies will be discussed through topics such as clocking (PLLs and DLLs), clock distribution networks, sampling circuits, high-speed transceivers, timing recovery techniques, equalization, monitor circuits, power delivery, and converters (A/D and D/A). A design project is an integral part of the course.
Instructor: Emami
EE 125

Digital Electronics and Design with FPGAs and VHDL

9 units (3-6-0)   |  second term
Prerequisites: basic knowledge of digital electronics.
Study of programmable logic devices (CPLDs and FPGAs). Detailed study of the VHDL language, with basic and advanced applications. Review and discussion of digital design principles for combinational-logic, combinational-arithmetic, sequential, and state-machine circuits. Detailed tutorials for synthesis and simulation tools using FPGAs and VHDL. Wide selection of complete, real-world fundamental advanced projects, including theory, design, simulation, and physical implementation. All designs are implemented using state-of-the-art development boards. Not offered 2016-17.
Instructor: Pedroni
EE/Ma/CS 126 ab

Information Theory

9 units (3-0-6)   |  first, second terms
Prerequisites: Ma 3.
Shannon's mathematical theory of communication, 1948-present. Entropy, relative entropy, and mutual information for discrete and continuous random variables. Shannon's source and channel coding theorems. Mathematical models for information sources and communication channels, including memoryless, Markov, ergodic, and Gaussian. Calculation of capacity and rate-distortion functions. Universal source codes. Side information in source coding and communications. Network information theory, including multiuser data compression, multiple access channels, broadcast channels, and multiterminal networks. Discussion of philosophical and practical implications of the theory. This course, when combined with EE 112, EE/Ma/CS 127, EE 161, EE 167, and/or EE226 should prepare the student for research in information theory, coding theory, wireless communications, and/or data compression.
Instructor: Effros
EE/Ma/CS 127

Error-Correcting Codes

9 units (3-0-6)   |  second term
Prerequisites: Ma 2.
This course develops from first principles the theory and practical implementation of the most important techniques for combating errors in digital transmission or storage systems. Topics include algebraic block codes, e.g., Hamming, BCH, Reed-Solomon (including a self-contained introduction to the theory of finite fields); and the modern theory of sparse graph codes with iterative decoding, e.g. LDPC codes, turbo codes. The students will become acquainted with encoding and decoding algorithms, design principles and performance evaluation of codes.
Instructor: Kostina
EE 128 ab

Selected Topics in Digital Signal Processing

9 units (3-0-6)   |  second, third terms
Prerequisites: EE 111 and EE 160 or equivalent required, and EE 112 or equivalent recommended.
The course focuses on several important topics that are basic to modern signal processing. Topics include multirate signal processing material such as decimation, interpolation, filter banks, polyphase filtering, advanced filtering structures and nonuniform sampling, optimal statistical signal processing material such as linear prediction and antenna array processing, and signal processing for communication including optimal transceivers. Not offered 2016-17.
CS/EE/Ma 129 abc

Information and Complexity

9 units (3-0-6), first and second terms   |  (1-4-4) third term
Prerequisites: basic knowledge of probability and discrete mathematics.
A basic course in information theory and computational complexity with emphasis on fundamental concepts and tools that equip the student for research and provide a foundation for pattern recognition and learning theory. First term: what information is and what computation is; entropy, source coding, Turing machines, uncomputability. Second term: topics in information and complexity; Kolmogorov complexity, channel coding, circuit complexity, NP-completeness. Third term: theoretical and experimental projects on current research topics. Not offered 2016-17.
APh/EE 130

Electromagnetic Theory

9 units (3-0-6)   |  first term
Electromagnetic fields in vacuum: microscopic Maxwell's equations. Monochromatic fields: Rayleigh diffraction formulae, Huyghens principle, Rayleigh-Sommerfeld formula. The Fresnel-Fraunhofer approximation. Electromagnetic field in the presence of matter, spatial averages, macroscopic Maxwell equations. Helmholtz's equation. Group-velocity and group-velocity dispersion. Confined propagation, optical resonators, optical waveguides. Single mode and multimode waveguides. Nonlinear optics. Nonlinear propagation. Second harmonic generation. Parametric amplification. Not offered 2016-2017.
Instructor: Crosignani
EE/APh 131

Light Interaction with Atomic Systems - Lasers

9 units (3-0-6); second term   |  Prerequisites:
Light-matter interaction, spontaneous and induced transitions in atoms and semiconductors. Absorption, amplification, and dispersion of light in atomic media. Principles of laser oscillation, generic types of lasers including semiconductor lasers, mode-locked lasers. Frequency combs in lasers. The spectral properties and coherence of laser light.
Instructor: Yariv
APh/EE 132

Special Topics in Photonics and Optoelectronics

9 units (3-0-6)   |  third term
Interaction of light and matter, spontaneous and stimulated emission, laser rate equations, mode-locking, Q-switching, semiconductor lasers. Optical detectors and amplifiers; noise characterization of optoelectronic devices. Propagation of light in crystals, electro-optic effects and their use in modulation of light; introduction to nonlinear optics. Optical properties of nanostructures.
Instructor: Staff
EE/CS/EST 135

Power System Analysis

9 units (3-3-3)   |  second term
Prerequisites: EE 44, Ma 2, or equivalent.
Phasor representation, 3-phase transmission system, per-phase analysis; power system modeling, transmission line, transformer, generator; network matrix, power flow solution, optimal power flow; Swing equation, stability, protection; demand response, power markets.
Instructor: Low
CS/EE 143

Communication Networks

9 units (3-3-3)   |  first term
Prerequisites: Ma 2, Ma 3, CS 24 and CS 38, or instructor permission.
This course focuses on the link layer (two) through the transport layer (four) of Internet protocols. It has two distinct components, analytical and systems. In the analytical part, after a quick summary of basic mechanisms on the Internet, we will focus on congestion control and explain: (1) How to model congestion control algorithms? (2) Is the model well defined? (3) How to characterize the equilibrium points of the model? (4) How to prove the stability of the equilibrium points? We will study basic results in ordinary differential equations, convex optimization, Lyapunov stability theorems, passivity theorems, gradient descent, contraction mapping, and Nyquist stability theory. We will apply these results to prove equilibrium and stability properties of the congestion control models and explore their practical implications. In the systems part, the students will build a software simulator of Internet routing and congestion control algorithms. The goal is not only to expose students to basic analytical tools that are applicable beyond congestion control, but also to demonstrate in depth the entire process of understanding a physical system, building mathematical models of the system, analyzing the models, exploring the practical implications of the analysis, and using the insights to improve the design.
Instructor: Low
CMS/CS/EE 144

Networks: Structure Economics

12 units (3-3-6)   |  second term
Prerequisites: Ma 2, Ma 3, Ma/CS 6a, and CS 38, or instructor permission.
Social networks, the web, and the internet are essential parts of our lives and we all depend on them every day, but do you really know what makes them work? This course studies the "big" ideas behind our networked lives. Things like, what do networks actually look like (and why do they all look the same)? How do search engines work? Why do memes spread the way they do? How does web advertising work? For all these questions and more, the course will provide a mixture of both mathematical analysis and hands-on labs. The course assumes students are comfortable with graph theory, probability, and basic programming.
Instructor: Wierman
CS/EE 145

Projects in Networking

9 units (0-0-9)   |  third term
Prerequisites: Either CMS/CS/EE 144 or CS 142 in the preceding term, or instructor permission.
Students are expected to execute a substantial project in networking, write up a report describing their work, and make a presentation.
Instructor: Staff
CS/EE 146

Advanced Networking

9 units (3-3-3)   |  third term
Prerequisites: CS/EE 143 or instructor's permission.
This is a research-oriented course meant for undergraduates and beginning graduate students who want to learn about current research topics in networks such as the Internet, power networks, social networks, etc. The topics covered in the course will vary, but will be pulled from current research topics in the design, analysis, control, and optimization of networks, protocols, and Internet applications. Usually offered in alternate years. Not offered 2016-17.
EE/CS 147

Digital Ventures Design

9 units (3-3-3)   |  first term
Prerequisites: none.
This course aims to offer the scientific foundations of analysis, design, development, and launching of innovative digital products and study elements of their success and failure. The course provides students with an opportunity to experience combined team-based design, engineering, and entrepreneurship. The lectures present a disciplined step-by-step approach to develop new ventures based on technological innovation in this space, and with invited speakers, cover topics such as market analysis, user/product interaction and design, core competency and competitive position, customer acquisition, business model design, unit economics and viability, and product planning. Throughout the term students will work within an interdisciplinary team of their peers to conceive an innovative digital product concept and produce a business plan and a working prototype. The course project culminates in a public presentation and a final report. Every year the course and projects focus on a particular emerging technology theme.
Instructor: Lahouti
EE/CNS/CS 148

Selected Topics in Computational Vision

9 units (3-0-6)   |  third term
Prerequisites: undergraduate calculus, linear algebra, geometry, statistics, computer programming.
The class will focus on an advanced topic in computational vision: recognition, vision-based navigation, 3-D reconstruction. The class will include a tutorial introduction to the topic, an exploration of relevant recent literature, and a project involving the design, implementation, and testing of a vision system.
Instructor: Perona
EE 150

Topics in Electrical Engineering

Units to be arranged   |  terms to be arranged
Content will vary from year to year, at a level suitable for advanced undergraduate or beginning graduate students. Topics will be chosen according to the interests of students and staff. Visiting faculty may present all or portions of this course from time to time.
Instructor: Staff
EE 151

Electromagnetic Engineering

9 units (3-0-6)   |  third term
Prerequisites: EE 45.
Foundations of circuit theory-electric fields, magnetic fields, transmission lines, and Maxwell's equations, with engineering applications.
Instructor: Yang
EE 153

Microwave Circuits and Antennas

12 units (3-2-7)   |  third term
Prerequisites: EE 45.
High-speed circuits for wireless communications, radar, and broadcasting. Design, fabrication, and measurements of microstrip filters, directional couplers, low-noise amplifiers, oscillators, detectors, and mixers. Design, fabrication, and measurements of wire antennas and arrays.
Instructor: Antsos
CMS/CS/CNS/EE 155

Machine Learning Data Mining

12 units (3-3-6)   |  second term
Prerequisites: background in algorithms and statistics (CS/CNS/EE/NB 154 or CS/CNS/EE 156 a or instructor's permission).
This course will cover popular methods in machine learning and data mining, with an emphasis on developing a working understanding of how to apply these methods in practice. This course will also cover core foundational concepts underpinning and motivating modern machine learning and data mining approaches. This course will be research-oriented, and will cover recent research developments.
Instructor: Yue
CS/CNS/EE 156 ab

Learning Systems

9 units (3-0-6)   |  first, third terms
Prerequisites: Ma 2 and CS 2, or equivalent.
Introduction to the theory, algorithms, and applications of automated learning. How much information is needed to learn a task, how much computation is involved, and how it can be accomplished. Special emphasis will be given to unifying the different approaches to the subject coming from statistics, function approximation, optimization, pattern recognition, and neural networks.
Instructor: Abu-Mostafa
EE/Ae 157 ab

Introduction to the Physics of Remote Sensing

9 units (3-0-6)   |  first, second terms
Prerequisites: Ph 2 or equivalent.
An overview of the physics behind space remote sensing instruments. Topics include the interaction of electromagnetic waves with natural surfaces, including scattering of microwaves, microwave and thermal emission from atmospheres and surfaces, and spectral reflection from natural surfaces and atmospheres in the near-infrared and visible regions of the spectrum. The class also discusses the design of modern space sensors and associated technology, including sensor design, new observation techniques, ongoing developments, and data interpretation. Examples of applications and instrumentation in geology, planetology, oceanography, astronomy, and atmospheric research.
Instructor: van Zyl
Ge/EE/ESE 157 c

Remote Sensing for Environmental and Geological Applications

9 units (3-3-3)   |  third term
Analysis of electromagnetic radiation at visible, infrared, and radio wavelengths for interpretation of the physical and chemical characteristics of the surfaces of Earth and other planets. Topics: interaction of light with materials, spectroscopy of minerals and vegetation, atmospheric removal, image analysis, classification, and multi-temporal studies. This course does not require but is complementary to EE 157ab with emphasis on applications for geological and environmental problems, using data acquired from airborne and orbiting remote sensing platforms. Students will work with digital remote sensing datasets in the laboratory and there will be one field trip.
Instructor: Ehlmann
ACM/CS/EE 158

Introduction to Mathematical Statistics

9 units (3-0-6)   |  third term
Prerequisites: CMS/ACM 113, ACM/EE 116 and ACM/CS 157.
Fundamentals of estimation theory and hypothesis testing; minimax analysis, Cramer-Rao bounds, Rao-Blackwell theory, shrinkage in high dimensions; Neyman-Pearson theory, multiple testing, false discovery rate; exponential families; maximum entropy modeling; other advanced topics may include graphical models, statistical model selection, etc. Throughout the course, a computational viewpoint will be emphasized.
Instructor: Chandrasekaran
CS/CNS/EE 159

Advanced Topics in Machine Learning

9 units (3-0-6)   |  third term
Prerequisites: CS 155; strong background in statistics, probability theory, algorithms, and linear algebra; background in optimization is a plus as well.
This course focuses on current topics in machine learning research. This is a paper reading course, and students are expected to understand material directly from research articles. Students are also expected to present in class, and to do a final project.
Instructor: Yue
EE 160

Random Variables and Stochastic Processes

9 units (3-0-6)   |  first term
Prerequisites: Math 2, Math 3.
Introduction to fundamental ideas and techniques of stochastic analysis. Random variables, expectation and conditional expectation, joint distributions, covariance, moment generating functions, central limit theorem, weak and strong laws of large numbers, discrete time stochastic processes, stationarity, power spectral densities, Gaussian processes, Poisson processes. The course develops applications in areas such as communication, signal processing, networks and queues. Not offered 2016-17.
Instructor: Hassibi
EE 161

Wireless Communications

9 units (3-0-6)   |  third term
Prerequisites: EE 160.
This course will cover the fundamentals of wireless channels and channel models, wireless communication techniques, and wireless networks. Topics include statistical models for time-varying narrowband and wideband channels, fading models for indoor and outdoor systems, macro- and microcellular system design, channel access and spectrum sharing using TDMA, FDMA, and CDMA, time-varying channel capacity and spectral efficiency, modulation and coding for wireless channels, antenna arrays, diversity combining and multiuser detection, dynamic channel allocation, and wireless network architectures and protocols. Given in alternate years. Not offered 2016-17.
EE 163 ab

Communication Theory

9 units (3-0-6)   |  second, third terms
Prerequisites: EE 111; ACM/EE 116 or equivalent.
Mathematical models of communication processes; signals and noise as random processes; sampling; modulation; spectral occupancy; intersymbol interference; synchronization; optimum demodulation and detection; signal-to-noise ratio and error probability in digital baseband and carrier communication systems; linear and adaptive equalization; maximum likelihood sequence estimation; multipath channels; parameter estimation; hypothesis testing; optical communication systems.
Instructor: Staff
EE 164

Stochastic and Adaptive Signal Processing

9 units (3-0-6)   |  third term
Prerequisites: ACM/EE 116 or equivalent.
Fundamentals of linear estimation theory are studied, with applications to stochastic and adaptive signal processing. Topics include deterministic and stochastic least-squares estimation, the innovations process, Wiener filtering and spectral factorization, state-space structure and Kalman filters, array and fast array algorithms, displacement structure and fast algorithms, robust estimation theory and LMS and RLS adaptive fields. Given in alternate years; Not offered 2016-17.
Instructor: Hassibi
EE/BE/MedE 166

Optical Methods for Biomedical Imaging and Diagnosis

9 units (3-1-5)   |  third term
Prerequisites: EE 151 or equivalent.
Topics include Fourier optics, scattering theories, shot noise limit, energy transitions associated with fluorescence, phosphorescence, and Raman emissions. Study of coherent anti-Stokes Raman spectroscopy (CARS), second harmonic generation and near-field excitation. Scattering, absorption, fluorescence, and other optical properties of biological tissues and the changes in these properties during cancer progression, burn injury, etc. Specific optical technologies employed for biomedical research and clinical applications: optical coherence tomography, Raman spectroscopy, photon migration, acousto-optics (and opto-acoustics) imaging, two-photon fluorescence microscopy, and second- and third-harmonic microscopy. Given in alternate years; Offered 2016-17.
Instructor: Yan
EE 167

Introduction to Data Compression and Storage

9 units (3-0-6)   |  third term
Prerequisites: Ma 3 or ACM/EE 116.
The course will introduce the students to the basic principles and techniques of codes for data compression and storage. The students will master the basic algorithms used for lossless and lossy compression of digital and analog data and the major ideas behind coding for flash memories. Topics include the Huffman code, the arithmetic code, Lempel-Ziv dictionary techniques, scalar and vector quantizers, transform coding; codes for constrained storage systems. Given in alternate years; offered 2016-17.
Instructor: Kostina
ACM/EE 170

Mathematics of Signal Processing

12 units (3-0-9)   |  third term
Prerequisites: ACM 104, CMS/ACM 113, and ACM/EE 116 ; or instructor's permission.
This course covers classical and modern approaches to problems in signal processing. Problems may include denoising, deconvolution, spectral estimation, direction-of-arrival estimation, array processing, independent component analysis, system identification, filter design, and transform coding. Methods rely heavily on linear algebra, convex optimization, and stochastic modeling. In particular, the class will cover techniques based on least-squares and on sparse modeling. Throughout the course, a computational viewpoint will be emphasized.
Instructor: Hassibi
EE/APh 180

Nanotechnology

6 units (3-0-3)   |  first term
This course will explore the techniques and applications of nanofabrication and miniaturization of devices to the smallest scale. It will be focused on the understanding of the technology of miniaturization, its history and present trends towards building devices and structures on the nanometer scale. Examples of applications of nanotechnology in the electronics, communications, data storage and sensing world will be described, and the underlying physics as well as limitations of the present technology will be discussed.
Instructor: Scherer
CS/EE 181 abc

VLSI Design Laboratory

12 units (3-6-3)   |  first, second terms
Digital integrated system design, with projects involving the design, verification, and testing of high-complexity CMOS microcircuits. First-term lecture and homework topics emphasize disciplined design, and include CMOS logic, layout, and timing; computer-aided design and analysis tools; and electrical and performance considerations. Each student is required in the first term to complete individually the design, layout, and verification of a moderately complex integrated circuit. Advanced topics second and third terms include self-timed design, computer architecture, and other topics that vary year by year. Projects are large-scale designs done by teams. Not offered 2016-17.
APh/EE 183

Physics of Semiconductors and Semiconductor Devices

9 units (3-0-6)   |  third term
Principles of semiconductor electronic structure, carrier transport properties, and optoelectronic properties relevant to semiconductor device physics. Fundamental performance aspects of basic and advanced semiconductor electronic and optoelectronic devices. Topics include energy band theory, carrier generation and recombination mechanisms, quasi-Fermi levels, carrier drift and diffusion transport, quantum transport.
Instructor: Nadj-Perge
EE/BE/MedE 185

MEMS Technology and Devices

9 units (3-0-6)   |  third term
Prerequisites: APh/EE 9 ab, or instructor's permission.
Micro-electro-mechanical systems (MEMS) have been broadly used for biochemical, medical, RF, and lab-on-a-chip applications. This course will cover both MEMS technologies (e.g., micro- and nanofabrication) and devices. For example, MEMS technologies include anisotropic wet etching, RIE, deep RIE, micro/nano molding and advanced packaging. This course will also cover various MEMS devices used in microsensors and actuators. Examples will include pressure sensors, accelerometers, gyros, FR filters, digital mirrors, microfluidics, micro total-analysis system, biomedical implants, etc. Not offered 2016-17.
CNS/Bi/EE/CS 186

Vision: From Computational Theory to Neuronal Mechanisms

12 units (4-4-4)   |  second term
Lecture, laboratory, and project course aimed at understanding visual information processing, in both machines and the mammalian visual system. The course will emphasize an interdisciplinary approach aimed at understanding vision at several levels: computational theory, algorithms, psychophysics, and hardware (i.e., neuroanatomy and neurophysiology of the mammalian visual system). The course will focus on early vision processes, in particular motion analysis, binocular stereo, brightness, color and texture analysis, visual attention and boundary detection. Students will be required to hand in approximately three homework assignments as well as complete one project integrating aspects of mathematical analysis, modeling, physiology, psychophysics, and engineering. Given in alternate years; not offered 2016-17.
EE/MedE 187

VLSI and ULSI Technology

9 units (3-0-6)   |  third term
Prerequisites: APh/EE 9 ab, EE/APh 180 or instructor's permission.
This course is designed to cover the state-of-the-art micro/nanotechnologies for the fabrication of ULSI including BJT, CMOS, and BiCMOS. Technologies include lithography, diffusion, ion implantation, oxidation, plasma deposition and etching, etc. Topics also include the use of chemistry, thermal dynamics, mechanics, and physics. Not offered 2016-17.
BE/EE/MedE 189 ab

Design and Construction of Biodevices

12 units (3-6-3) a = second and third terms   |  9 units (0-9-0) b = third term
Prerequisites: ACM 95/100 ab (for BE/EE/MedE 189 a); BE/EE/MedE 189 a (for BE/EE/MedE 189 b).
Part a, students will design and implement biosensing systems, including a pulse monitor, a pulse oximeter, and a real-time polymerase-chain-reaction incubator. Students will learn to program in LABVIEW. Part b is a student-initiated design project requiring instructor's permission for enrollment. Enrollment is limited to 24 students. BE/EE/MedE 189 a is an option requirement; BE/EE/MedE 189 b is not.
Instructor: Yang
EE 291

Advanced Work in Electrical Engineering

Units to be arranged
Special problems relating to electrical engineering. Primarily for graduate students; students should consult with their advisers.
Published Date: May 1, 2024